Differences Between Oriented vs. Unoriented Silicon Steel Plates | Exp

When it comes to the difference between 0.1MM oriented silicon steel plate and non-oriented silicon steel plate, first put aside 0.1MM oriented silicon steel plate, there is no oriented silicon steel plate. In fact, it will be made directly from a silicon steel sheet or a silicon steel sheet. In short, it would actually make the very low carbon ferrosilicon Soft Magnetic alloys that are indispensable in electricity and its electronics, as well as in its military industry.
In addition, speaking of 0.1mm oriented silicon steel plate does not have, it is actually the largest metal functional material. In terms of its output, it will actually directly account for 1% of world steel production. For ferrosilicon alloy with silicon content of 0.8% to 4.8%, in terms of heating and cold rolling into thickness, it is actually a silicon steel plate below 1mm.
For 0.1mm oriented silicon steel plate, there is actually no direct addition of silicon, so it can actually directly improve the resistivity and maximum permeability of iron, so it will actually directly reduce its stubbornness and core loss (iron loss) and magnetic timeliness, so it can be directly used as a variety of motors and their generators.
For the classification of 0.1mm oriented silicon steel plates, as far as silicon steel plates are concerned, they can be directly divided into low silicon and high silicon according to the different silicon content. In fact, the silicon content of low silicon chips is less than 2.8%. In this way, it will actually directly have some mechanical strength. For its part, it is mainly used in the manufacture of electric motors.
For the high silicon wafer in the 0.1MM oriented silicon steel sheet, in terms of silicon content, we actually need to note that it is actually 2.8%-4.8%. In addition, for 0.1MM oriented silicon steel sheet, on its own, it will actually have good magnetic properties directly, but in fact it will be more brittle. Primarily, it will actually be used directly to manufacture our Transformer Cores.